
Enthusiasts looking to improve their Challenger's performance
Fits SXT V6, R/T 5.7L, and Scat Pack 6.4L. Does not fit regular SRT Hellcat 6.2L and SRT Demon.
Whiteline
MPN: BCK003 · SKU: BHK016
View on Whiteline websiteSkill Level
Install Time
Build Stage
View on Car
See install area on car →Kit Type
Estimated Install Cost
Total with part: $775.76–$925.76
What You'll Need
Jack, stands, basic hand tools. Alignment recommended after install.
Enthusiasts looking to improve their Challenger's performance
Fits SXT V6, R/T 5.7L, and Scat Pack 6.4L. Does not fit regular SRT Hellcat 6.2L and SRT Demon.
Whiteline's complete sway bar kit replaces both the front and rear bars with larger, adjustable units. Having adjustable bars lets you fine-tune your car's handling balance: stiffer front bar = more understeer (safer, easier to control), stiffer rear bar = more oversteer (more playful, rotates more in corners). Most Challenger owners start with the middle setting and adjust from there based on their driving style. The kit includes polyurethane bushings (stiffer than the stock rubber), endlinks, and all mounting hardware. This is one of the most transformative handling mods you can do — the Challenger goes from a floaty boulevard cruiser to a responsive corner-carver.
Highlighted parts show where Front and Rear Sway Bar Kit installs on the car.
Loading 3D scene
0%
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Front Sway Bar
Included in kit
Front Sway Bar End Links
Included in kit
Front Sway Bar Bushings
Included in kit
Rear Sway Bar
Included in kit
Rear Sway Bar End Links
Included in kit
Specifications
1 attributes| Installation | About 2 hours, light mechanical skills required1 |
Sources: 1AmericanMuscle
Compare prices across 1 retailer — every link opens the real product page
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
This is rated as an easy bolt-on install (3-4 hours). Most owners complete it in a driveway with hand tools.
Based on product data
Yes — a 3-year limited warranty per the listing on americanmuscle. Refer to the retailer or manufacturer for the full terms before installation.
Based on product data
Key callouts from the retailer install notes: • Wheel realignment is required when installing the bars.
Based on product data
Plan on having or sourcing: Jack, stands, basic hand tools. Alignment recommended after install.. The build planner on this site flags missing supporting parts when you add this kit to a build.
Based on product data
Sway Bars buyer's guide
How to pick sway bars for your Challenger — what matters, what doesn't, and what to avoid.
Other sway bars for your Challenger
Compare Side-by-Side
Eibach
Anti-Roll Kit

SPC Performance
Adjustable End Links (Front Pair)

Hotchkis
Sport Suspension Sway Bar Set

BMR Suspension
BMR Sway Bar Kit (38/25mm, Black)

BMR
Adjustable Front Sway Bar

Eibach
Eibach Anti-Roll Front Sway Bar