Back to Engine & Power
DIY — No shop neededOpen full visualizer → 
Enthusiast builds balancing power and reliability
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
2022 Dodge Challenger SRT Hellcat(6.2L Supercharged HEMI V8)
Fits the V8 HEMI Challengers (R/T 5.7L, Scat Pack 6.4L, Hellcat 6.2L SC). Not the V6 SXT.
HP Tuners
MPVI3 Standard Kit
MPN: M03-000-02 · SKU: M02-000-00
View on HP Tuners website4.4across 8 reviews
$349.99
+35
Horsepower
+40
Torque (ft-lbs)
Skill Level
Professional
Install Time
Varies
View on Car
See replacement target on car →Kit Type
Tuner Kit (No Fuel/Tune)
Estimated Install Cost
Powertrain Warranty Risk
Off-Road Use Only
Enthusiast builds balancing power and reliability
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
2022 Dodge Challenger SRT Hellcat(6.2L Supercharged HEMI V8)
Fits the V8 HEMI Challengers (R/T 5.7L, Scat Pack 6.4L, Hellcat 6.2L SC). Not the V6 SXT.
What Does This Do?
The HP Tuners MPVI 3 Standard Kit is a tuning device that allows you to adjust your car's engine settings for better performance and efficiency. It connects to your vehicle's computer to help you customize how your engine runs. Who it's for: This product is ideal for car enthusiasts who want to enhance their 2022 Dodge Challenger's performance, whether for daily driving or weekend racing. Trade-offs: Installing this kit may require some technical knowledge and could lead to a more aggressive engine response, which might not be suitable for all drivers.
Why Install This?
Benefits
- Noticeable power improvement you'll feel in daily driving and pulls
- Optimizes engine calibration for your specific mods
- Can adjust shift points, rev limiter, and correct for bolt-on modifications
Things to Know
- A tune is often required to get full benefit from other mods like intakes or headers
- Professional installation recommended — requires specialty tools or expertise
Where does this go on the car?
MPVI3 Standard Kit changes 2 primary stock components (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install targets (2)
- ECU Tuner / Programmer
- ECU Tuning Software / Interface
Included or supporting (1)
- ECU Tuneaddition
This Upgrade Covers 3 Areas
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
ECU Tuner / Programmer
Replaces stock
ECU Tune
addition
ECU Tuning Software / Interface
Replaces stock
Tune Required
This part requires an ECU tune to function correctly. Without a tune, the engine computer won't adjust for the new part, potentially causing poor performance, check engine lights, or engine damage.
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
This part isn't currently available from any of our tracked retailers.
All retailers were last verified 5h ago; the part may be back in stock soon. It may have been discontinued or temporarily out of stock. Browse the engine & power category for in-stock alternatives.
Frequently Asked Questions
Will the MPVI 3 Standard Kit fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the MPVI 3 Standard Kit?
This is rated as a professional-level install. We recommend a professional shop with the right lift and tooling. A custom tune is required for safe operation.
Based on product data
How much horsepower does the MPVI 3 Standard Kit add?
On a stock vehicle this typically adds about 35 HP and 40 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Tuners & Programmers buyer's guide
How to pick tuners & programmers for your Challenger — what matters, what doesn't, and what to avoid.
Other tuners & programmers for your Challenger
Compare Side-by-SideDiabloSport
inTune i3 Platinum Programmer
$475.95
+25+30
10 HP less · $126 more
DiabloSport
Predator 2 Programmer
$532.95
+20+25
15 HP less · $183 more
Diablosport
Trinity 2 Platinum Tuner and Modified PCM Swap Kit
$1,899.95
$1550 more
aFe Power
SCORCHER GT Power Module
$348.30
+11+12
24 HP less · $2 cheaper
aFe Power
aFe Power Scorcher GT Power Module
$348.30
+10+21
25 HP less · $2 cheaper
ID Speed Shop
Single Custom Tune
$895.00
$545 more