CarModPlanner2022 Challenger
PartsBy systemView in 3DBlogMy Build (0)
CarModPlanner

The free build planner for the 2022 Dodge Challenger. Browse performance parts, check compatibility, compare prices, and visualize your mods in 3D.

Browse Parts

Engine & PowerExhaust SystemsDrivetrainSuspensionBrakesWheels & Tires

Tools

Parts CatalogBrowse by SystemBuild Planner3D VisualizerCompare Parts

Learn

All ArticlesBuyer's GuidesSafety TipsBuild GuidesHow-To Articles

CarModPlanner is a free community resource for 2022 Dodge Challenger enthusiasts. Not affiliated with Stellantis, Dodge, or any retailer. Prices shown are sourced from third-party retailers and may not reflect current pricing.

Affiliate disclosure·We earn a commission on qualifying purchases through some retailer links.

HomeEngine & PowerFuel Pumps
Back to Engine & Power
DeatschWerks 340 lph In-Tank Fuel Pump for 2022 Dodge Challenger

Enthusiasts looking to improve their Challenger's performance

Compatible Vehicles

2022 Dodge Challenger SXT(3.6L Pentastar V6)
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
2022 Dodge Challenger SRT Hellcat(6.2L Supercharged HEMI V8)

Fits 2008-2023 Challenger all HEMI engines.

DeatschWerks

340 lph In-Tank Fuel Pump

MPN: 9-309 · SKU: 9-301-1041

View on DeatschWerks website
4.9across 7 reviews
$189.00
3-year warranty

Skill Level

Intermediate

Install Time

2-3 hours

Build Stage

Stage 3 — Engine internals / forced induction

View on Car

See replacement target on car →

Estimated Install Cost

$150–$400 labor

Total with part: $339.00–$589.00

Low Warranty Risk

What You'll Need

Fuel system depressurization required. Rear seat removal for tank access.

Enthusiasts looking to improve their Challenger's performance

Compatible Vehicles

2022 Dodge Challenger SXT(3.6L Pentastar V6)
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
2022 Dodge Challenger SRT Hellcat(6.2L Supercharged HEMI V8)

Fits 2008-2023 Challenger all HEMI engines.

Required & Recommended Supporting Parts1 strongly recommended1 tip
1 strongly recommended1 tip

Strongly RecommendedECU Tuner / Programmer — Upgraded fuel pump may require a tune to adjust fuel pressure tables for optimal performance.

View 3 suggestions
HP TunersHP Tuners MPVI3 Standard Kit$349.99DiabloSportDiabloSport inTune i3 Platinum Programmer$475.95DiabloSportDiabloSport Predator 2 Programmer$532.95

SuggestedFuel Pump Voltage Booster — Voltage booster helps maintain consistent fuel pressure under high electrical loads.

View 1 suggestion
Fore InnovationsFore Innovations Fuel Pump Voltage Booster (Plug-and-Play)

What Does This Do?

The DW 300 (340 lph) sits between the stock pump (~255 lph) and the DW 400 (415 lph). It's the right choice for mildly supercharged builds running 6-10 PSI on pump gas — enough headroom to feed the engine safely without the cost of the larger DW 400. Like all Deatsch Werks pumps, it's a direct drop-in for the stock pump. The 340 lph supports approximately 600 HP on gasoline. If you're planning to run E85 or exceed 600 HP, step up to the DW 400.

Why Install This?

Benefits

  • Moderate install — doable in a home garage with some mechanical experience

Where does this go on the car?

340 lph In-Tank Fuel Pump changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.

Open full visualizer →

Loading 3D scene

0%

Red = primary stock component changed

Primary install target (1)

  • In-Tank Fuel Pump

Specifications

1 attributes
Flow Rate340 LPH1

Sources: 1AmericanMuscle

Tune Required

This part requires an ECU tune to function correctly. Without a tune, the engine computer won't adjust for the new part, potentially causing poor performance, check engine lights, or engine damage.

Price Comparison

Compare prices across 1 retailer — every link opens the real product page

Best price
$189.00
at AmericanMuscle
Best PriceAmericanMuscle
Verified 8h ago
$189.00

Frequently Asked Questions

Will the 340 lph In-Tank Fuel Pump fit my car?

Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.

Based on product data

How hard is it to install the 340 lph In-Tank Fuel Pump?

This is rated as an intermediate install (2-3 hours). Plan for a half-day with hand tools and basic mechanical experience. A custom tune is required for safe operation.

Based on product data

Does the 340 lph In-Tank Fuel Pump come with a warranty?

Yes — a 3-year limited warranty per the listing on americanmuscle. Refer to the retailer or manufacturer for the full terms before installation.

Based on product data

Do I need anything else to install the 340 lph In-Tank Fuel Pump?

Plan on having or sourcing: Fuel system depressurization required. Rear seat removal for tank access.. The build planner on this site flags missing supporting parts when you add this kit to a build.

Based on product data

Fuel Pumps buyer's guide

How to pick fuel pumps for your Challenger — what matters, what doesn't, and what to avoid.

Other fuel pumps for your Challenger

Compare Side-by-Side
Autopart Premium Fuel Pump Assembly (SRT 6.4L V8)

Autopart Premium

Fuel Pump Assembly (SRT 6.4L V8)

$101.95
$87 cheaper
Autopart Premium Fuel Pump Assembly

Autopart Premium

Fuel Pump Assembly

$98.95
$90 cheaper
TYC Fuel Pump Module

TYC

Fuel Pump Module

$123.97
$65 cheaper
TYC Secondary Fuel Pump Module

TYC

Secondary Fuel Pump Module

$100.97
$88 cheaper
Delphi Fuel Pump Assembly - Secondary Right (Fuel Transfer Unit)

Delphi

Fuel Pump Assembly - Secondary Right (Fuel Transfer Unit)

$277.97
$89 more
Delphi Fuel Pump Module Assembly - Left

Delphi

Fuel Pump Module Assembly - Left

$107.97
$81 cheaper