Back to Engine & Power
$75–$200 labor
Open full visualizer →
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
Fits 2011-2023 Challenger 5.7L and 6.4L HEMI (dual-plug).
MSD
Blaster HVC Ignition Coils 16-Pack
MPN: MSD-82648
View on MSD website$560.00
+5
Horsepower
+5
Torque (ft-lbs)
Skill Level
Bolt-on
Install Time
1-2 hours
Build Stage
Stage 2 — Supporting Mods
View on Car
See replacement target on car →Estimated Install Cost
Total with part: $635.00–$760.00
Warranty Safe
50-State Legal
What You'll Need
Basic hand tools. One bolt per coil.
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
Fits 2011-2023 Challenger 5.7L and 6.4L HEMI (dual-plug).
Required & Recommended Supporting Parts1 strongly recommended1 tip
1 strongly recommended1 tip
Strongly RecommendedECU Tuner / Programmer — Upgraded coils may require tune adjustments for optimal ignition timing and dwell settings.
SuggestedSpark Plugs — High-voltage coils work best with performance spark plugs designed for stronger spark energy.
What Does This Do?
The HEMI engine uses a dual-plug design — two spark plugs per cylinder, 16 total. Each plug has its own ignition coil sitting on top of it (coil-on-plug design). MSD's Blaster HVC coils deliver up to 15% more spark energy than stock, which means more complete combustion of the air-fuel mixture. On a stock engine, the difference is subtle — smoother idle, slightly better throttle response. But on a modified engine with higher compression, aggressive cam timing, or boost, the stronger spark becomes genuinely important for preventing misfires. The 16-pack replaces all coils on the engine.
Why Install This?
Benefits
- Incremental gains that stack well with other bolt-on mods
- More reliable combustion under high load and boost
- Longer service life compared to stock plugs, especially with forced induction
- Easy bolt-on installation — most people can do this in their driveway with basic tools
Where does this go on the car?
Blaster HVC Ignition Coils 16-Pack changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install target (1)
- Ignition Coils
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
Best price
$560.00
at Lethal Performance
Frequently Asked Questions
Will the Blaster HVC Ignition Coils 16-Pack fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the Blaster HVC Ignition Coils 16-Pack?
This is rated as an easy bolt-on install (1-2 hours). Most owners complete it in a driveway with hand tools.
Based on product data
How much horsepower does the Blaster HVC Ignition Coils 16-Pack add?
On a stock vehicle this typically adds about 5 HP and 5 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Do I need anything else to install the Blaster HVC Ignition Coils 16-Pack?
Plan on having or sourcing: Basic hand tools. One bolt per coil.. The build planner on this site flags missing supporting parts when you add this kit to a build.
Based on product data
Ignition Coils buyer's guide
How to pick ignition coils for your Challenger — what matters, what doesn't, and what to avoid.
Other ignition coils for your Challenger
Compare Side-by-Side
