No product image available yet
First-time modders or complementing existing upgrades
Fits 2015-2023 Challenger 5.7L and 6.4L HEMI.
Borla
MPN: 140627 · SKU: 140753-disambig-96
View on Borla website+10
Horsepower
+10
Torque (ft-lbs)
Skill Level
Install Time
Build Stage
View on Car
See replacement target on car →Estimated Install Cost
Total with part: $1,650.00–$2,100.00
Sound Level
moderate
Deep, refined V8 tone with minimal drone. Good balance of sound and livability for a daily driver.
What You'll Need
Jack and jack stands, basic hand tools.
First-time modders or complementing existing upgrades
Fits 2015-2023 Challenger 5.7L and 6.4L HEMI.
The S-Type sits between Borla's quiet Touring and screaming ATAK in terms of volume. Most Challenger owners end up here because it's the Goldilocks option — deep and aggressive under acceleration with a satisfying rumble at idle, but not so loud that it drones on the highway or annoys the neighbors at 6 AM. Same T-304 stainless construction and million-mile warranty as the ATAK. The S-Type uses a combination of perforated cores and sound management to achieve its balanced tone. This is probably the best choice if your Challenger is a daily driver that you also want to sound great.
S-Type Cat-Back Exhaust (5.7L/6.4L) changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Resonators
Included in kit
Cat-Back System
Replaces stock
Compare prices across 1 retailer — every link opens the real product page
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
This is rated as an intermediate install (2-3 hours). Plan for a half-day with hand tools and basic mechanical experience.
Based on product data
On a stock vehicle this typically adds about 10 HP and 10 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Plan on having or sourcing: Jack and jack stands, basic hand tools.. The build planner on this site flags missing supporting parts when you add this kit to a build.
Based on product data
Cat-Back Exhaust buyer's guide
How to pick cat-back exhaust for your Challenger — what matters, what doesn't, and what to avoid.
Other cat-back exhaust for your Challenger
Compare Side-by-Side
Borla
ATAK Cat-Back Exhaust

Corsa Performance
Corsa Xtreme Cat-Back Exhaust

AWE Tuning
Touring Edition Cat-Back Exhaust

Flowmaster
Outlaw Cat-Back Exhaust

AWE Tuning
AWE Track Edition Cat-Back Exhaust

Corsa Performance
Xtreme Valved Cat-Back Exhaust