
First-time modders or complementing existing upgrades
Fits the V8 HEMI Challengers (R/T 5.7L, Scat Pack 6.4L, Hellcat 6.2L SC). Not the V6 SXT.
AWE Tuning
MPN: 3015-11050 · SKU: 3015-33130
View on AWE Tuning website+14
Horsepower
+16
Torque (ft-lbs)
Estimated Install Cost
Total with part: $1,540.00–$1,740.00
Sound Level
aggressive
Loud, raw V8 sound. Aggressive on cold start and under throttle. Some highway drone.
First-time modders or complementing existing upgrades
Fits the V8 HEMI Challengers (R/T 5.7L, Scat Pack 6.4L, Hellcat 6.2L SC). Not the V6 SXT.
Strongly RecommendedECU Tuner / Programmer — Off-road mid-pipe removes cats which may trigger check engine lights without a tune.
The AWE Track Edition Cat-Back Exhaust is an aftermarket exhaust system that replaces your factory exhaust to enhance the sound and performance of your 2022 Dodge Challenger. It improves exhaust flow, which can lead to better horsepower and torque while giving your car a more aggressive sound. Who it's for: This product is ideal for drivers looking to upgrade their Challenger for a sportier sound and improved performance, especially those who enjoy weekend driving or track days. Trade-offs: Installing this exhaust may result in a louder cabin noise, which some drivers may find enjoyable while others might prefer a quieter ride.
AWE Track Edition Cat-Back Exhaust changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Mid-Pipe
Included in kit
Cat-Back System
Replaces stock
Specifications
2 attributes| Material | T304L stainless steel1 |
| Installation | Direct Bolt-On1 |
Sources: 1AmericanMuscle
Compare prices across 1 retailer — every link opens the real product page
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
This is rated as an easy bolt-on install. Most owners complete it in a driveway with hand tools.
Based on product data
On a stock vehicle this typically adds about 14 HP and 16 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Cat-Back Exhaust buyer's guide
How to pick cat-back exhaust for your Challenger — what matters, what doesn't, and what to avoid.
Install instructions, videos, sound clips, and reference docs collected from the manufacturer and retailers.
Other cat-back exhaust for your Challenger
Compare Side-by-Side
Borla
ATAK Cat-Back Exhaust

Corsa Performance
Corsa Xtreme Cat-Back Exhaust

AWE Tuning
Touring Edition Cat-Back Exhaust

Flowmaster
Outlaw Cat-Back Exhaust
Borla
S-Type Cat-Back Exhaust (5.7L/6.4L)

Corsa Performance
Xtreme Valved Cat-Back Exhaust