Back to Engine & Power
$1500–$3000 labor
Open full visualizer →
Serious builds looking for maximum performance
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
Fits the 5.7L HEMI R/T and 6.4L HEMI Scat Pack. Not the V6 SXT or supercharged Hellcat.
ProCharger
P-1SC-1 High Output Supercharger Kit
MPN: 1DQ204-SCI-P · SKU: 1DH214-SCI
View on ProCharger website4.6across 57 reviews
$6,674.00
+130
Horsepower
+120
Torque (ft-lbs)
Skill Level
Professional
Install Time
Varies
View on Car
See replacement target on car →Kit Type
Complete Kit
Estimated Install Cost
Total with part: $8,174.00–$9,674.00
Powertrain Warranty Risk
Off-Road Use Only
What You'll Need
Fuel components; Electronic components; Programmer or calibration
Heads upCustom dyno tuning is required for operation.Source: AmericanMuscle
Heads upAll engine and exhaust modifications must be noted at time of order.Source: AmericanMuscle
Serious builds looking for maximum performance
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
Fits the 5.7L HEMI R/T and 6.4L HEMI Scat Pack. Not the V6 SXT or supercharged Hellcat.
Required & Recommended Supporting Parts3 required1 strongly recommended4 tips
3 required1 strongly recommended4 tips
ConflictECU Tuner / Programmer — Supercharger requires ECU tuning to adjust fuel and timing maps for boost.
+6 similar reasons
- Forced induction requires ECU tuning to adjust fuel and timing maps safely.
- Supercharger requires ECU tuning to adjust fuel and timing for boost safely.
- Supercharger requires ECU tuning to prevent engine damage from lean conditions.
- Supercharger install requires ECU tuning to prevent engine damage from lean conditions.
- Supercharger installation requires ECU tuning to adjust fuel maps and timing for forced induction.
- Forced-induction calibrations have to be flashed onto the ECU. Make sure you have a handheld tuner (DiabloSport, HP Tuners, Predator) in your build, or budget for tuning shop time.
RequiredIn-Tank Fuel Pump — Stock fuel pump may not supply enough volume for 7-8 psi boost levels.
+5 similar reasons
- High-flow fuel pump needed to supply adequate fuel pressure under boost.
- Stock fuel pump may not flow enough volume for supercharged power levels.
- Stock fuel pump may not supply adequate flow for supercharged power levels.
- Stock fuel pump may not supply enough volume for supercharged power levels.
- Stock fuel pump may struggle to supply adequate flow at higher boost levels.
RequiredSpark Plugs — Forced induction typically requires colder heat range spark plugs.
+8 similar reasons
- Boost requires colder heat range spark plugs to prevent detonation.
- Colder heat range spark plugs recommended for forced induction applications.
- Colder heat range spark plugs recommended to prevent detonation under boost.
- Boost typically requires colder heat range spark plugs to prevent detonation.
- Forced induction requires colder heat range spark plugs to prevent detonation.
- Forced induction typically requires colder heat range spark plugs for reliability.
- Colder heat range spark plugs recommended for forced induction to prevent detonation.
- Boost increases combustion temperatures. Colder-heat-range spark plugs reduce the risk of pre-ignition.
Strongly RecommendedHeat Exchanger & Radiator — Forced induction generates significantly more heat. An intercooler heat exchanger or upgraded cooling helps prevent power loss and detonation.
View 2 suggestions
Add a Heat Exchanger
Add a Radiator
No linked products in the catalog yet.
SuggestedFront Brake Pads, Front Brake Rotors & Big Brake Kit (Front) — Significantly more power deserves more stopping power. Consider an upgraded front big brake kit or at minimum performance pads and rotors.
View 9 suggestions
Add a Front Brake Pads
Add a Front Brake Rotors
SuggestedRadiator — Upgraded radiator helps manage extra heat from forced induction.
+3 similar reasons
- Upgraded radiator helps manage increased heat from forced induction.
- Upgraded radiator helps manage increased heat from supercharged engine.
- Upgraded radiator helps manage increased heat from supercharged engine operation.
Needs: Radiator
No linked products in the catalog yet.
SuggestedBrake Fluid — High-performance brake fluid recommended for increased power levels.
View 1 suggestion
SuggestedTorque Converter — Higher stall torque converter optimizes power delivery with supercharger.
What Does This Do?
Centrifugal supercharger complete kit. High-RPM power delivery and a livable street car. Who it's for: Drivers who want big power without losing daily driveability. Best-in-class top-end pull on the dyno. Trade-offs: Power builds with RPM — feels lazier than a roots blower below 4000 RPM. Belt-driven whine is part of the experience.
Why Install This?
Benefits
- Major power gains — one of the highest-impact upgrades you can make
- Forced induction delivers massive power across the entire RPM range
- Transforms the character of the car — significantly faster acceleration
Things to Know
- Requires supporting mods (fuel system, tune) for safe operation
- May affect warranty if not dealer-installed
- Professional installation recommended — requires specialty tools or expertise
Where does this go on the car?
P-1SC-1 High Output Supercharger Kit changes 2 primary stock components (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install targets (2)
- Cold Air Intake System
- Supercharger Head Unit
Included or supporting (8)
- Supercharger Drive Pulleyincluded
- Supercharger Beltincluded
- Intercoolerincluded
- Boost Tubes & Couplersincluded
- Blow-Off / Bypass Valveincluded
- MAP Sensor Upgradeincluded
- Fuel Injectorsincluded
- ECU Tuneincluded
This Upgrade Covers 10 Areas
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Cold Air Intake System
Replaces stock
Supercharger Head Unit
Replaces stock
Supercharger Drive Pulley
Included in kit
Supercharger Belt
Included in kit
Intercooler
Included in kit
Boost Tubes & Couplers
Included in kit
Blow-Off / Bypass Valve
Included in kit
MAP Sensor Upgrade
Included in kit
Fuel Injectors
Included in kit
ECU Tune
Included in kit
Specifications
4 attributes| Supercharger Head Unit | P-1SC-11 |
| Intercooler Type | Air-to-air1 |
| Boost Level | 7-8 psi1 |
| HP Gains | 130+ HP on 5.7L, 150+ HP on 6.4L1 |
Sources: 1AmericanMuscle
Tune Required
This part requires an ECU tune to function correctly. Without a tune, the engine computer won't adjust for the new part, potentially causing poor performance, check engine lights, or engine damage.
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
Best price
$6,674.00
at AmericanMuscle
Frequently Asked Questions
Will the P-1 SC-1 High Output Supercharger Kit fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the P-1 SC-1 High Output Supercharger Kit?
This is rated as a professional-level install. We recommend a professional shop with the right lift and tooling. A custom tune is required for safe operation.
Based on product data
How much horsepower does the P-1 SC-1 High Output Supercharger Kit add?
On a stock vehicle this typically adds about 130 HP and 120 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Anything I need to know before installing the P-1 SC-1 High Output Supercharger Kit?
Key callouts from the retailer install notes: • Custom dyno tuning is required for operation. • All engine and exhaust modifications must be noted at time of order.
Based on product data
Do I need anything else to install the P-1 SC-1 High Output Supercharger Kit?
Plan on having or sourcing: Fuel components; Electronic components; Programmer or calibration. The build planner on this site flags missing supporting parts when you add this kit to a build.
Based on product data
Supercharger Kits buyer's guide
How to pick supercharger kits for your Challenger — what matters, what doesn't, and what to avoid.
Other supercharger kits for your Challenger
Compare Side-by-SideWhipple
Gen 5 3.0L Supercharger Kit
$8,899.99
+200+180
+70 HP more · $2226 more
Magnuson
TVS2650 Magnum Performance Supercharger Kit
$8,995.00
+160
$2321 more
Magnuson
TVS2300 Supercharger Kit
$7,595.00
+140+130
+10 HP more · $921 more
Whipple Superchargers
Whipple Supercharger Kit Gen 6 3.0L
$8,999.99
$2326 more
Magnuson
TVS2650 HEMI Supercharger System
$8,995.00
Up to 524Up to 529
+394 HP more · $2321 more
Magnuson
Magnum TVS2650 Supercharger Kit
$6,495.00
$179 cheaper