Back to Engine & Power
Open full visualizer →
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger SXT(3.6L Pentastar V6)
Fits the SXT V6 (3.6L Pentastar V6) only.
aFe Power
Afe Power 80mm Throttle Body
MPN: 46-39105
View on aFe Power website5.0across 5 reviews
$373.50from 2 retailers
+13
Horsepower
+14
Torque (ft-lbs)
Lifetime warranty
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger SXT(3.6L Pentastar V6)
Fits the SXT V6 (3.6L Pentastar V6) only.
Required & Recommended Supporting Parts1 strongly recommended2 tips
1 strongly recommended2 tips
Strongly RecommendedIntake Manifold — 87mm throttle body with stock 80mm intake manifold creates a flow step that reduces performance gains.
View 1 suggestion
SuggestedECU Tune — Aftermarket throttle bodies show their full benefit only with a tune that takes advantage of the increased airflow.
SuggestedECU Tuner / Programmer — Larger throttle body benefits from ECU tuning to optimize air/fuel ratios and throttle response.
Available variants
This product comes in 2 variants. Pick the one that matches your engine or trim.
What Does This Do?
A throttle body is the part that controls how much air flows into your engine when you press the gas pedal — this larger 80mm version allows more air through than the stock throttle body for increased power. Who it's for: Daily drivers and weekend enthusiasts who want a straightforward power upgrade without major modifications. Trade-offs: Adds around 13 horsepower and 14 lb-ft of torque, but may require a tune to run optimally and could slightly change throttle response feel.
Why Install This?
Benefits
- Incremental gains that stack well with other bolt-on mods
- Sharper throttle response and slightly improved peak flow
- Pairs well with cold air intake for maximum intake tract flow
- Easy bolt-on installation — most people can do this in their driveway with basic tools
Where does this go on the car?
Afe Power 80mm Throttle Body changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install target (1)
- Throttle Body
Specifications
3 attributes| Bore Size | 80mm1 |
| Material | CNC-machined from billet aluminum1 |
| Installation Note | It is recommended to install this throttle body kit with an aFe cold air intake.2 |
Sources: 1AmericanMuscle | 2Afepower
Price Comparison
Compare prices across 2 retailers — every link opens the real product page
Best price
$373.50
at AmericanMuscle
Frequently Asked Questions
Will the Afe Power 80mm Throttle Body fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the Afe Power 80mm Throttle Body?
This is rated as an easy bolt-on install. Most owners complete it in a driveway with hand tools.
Based on product data
Does the Afe Power 80mm Throttle Body come with a warranty?
Yes — a lifetime warranty per the listing on americanmuscle. Refer to the retailer or manufacturer for the full terms before installation.
Based on product data
How much horsepower does the Afe Power 80mm Throttle Body add?
On a stock vehicle this typically adds about 13 HP and 14 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Throttle Bodies buyer's guide
How to pick throttle bodies for your Challenger — what matters, what doesn't, and what to avoid.
Other throttle bodies for your Challenger
Compare Side-by-SideBBK Performance
87mm CNC Ported Throttle Body
$571.99
+10+12
3 HP less · $198 more
BBK Performance
90mm Cnc Throttle Body
$549.99
$176 more
BBK
BBK 92mm Throttle Body
$599.99
$226 more
Mopar
92mm Throttle Body
$355.78
$18 cheaper
Granatelli Motor Sports
95mm Throttle Body
$648.38
$275 more
aFe Power
aFe Power 90mm Throttle Body
$469.80
$96 more