Back to Engine & Power
$50–$150 labor
Open full visualizer →
Enthusiast builds balancing power and reliability
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
2022 Dodge Challenger SRT Hellcat(6.2L Supercharged HEMI V8)
Fits the V8 HEMI Challengers (R/T 5.7L, Scat Pack 6.4L, Hellcat 6.2L SC). Not the V6 SXT.
Holley
Long Runner Intake Manifold
MPN: 300-930BK · SKU: 300-264
View on Holley website$598.95
+18
Horsepower
+22
Torque (ft-lbs)
Limited warranty
Estimated Install Cost
Total with part: $648.95–$748.95
Low Warranty Risk
CARB Exempt
Enthusiast builds balancing power and reliability
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
2022 Dodge Challenger SRT Hellcat(6.2L Supercharged HEMI V8)
Fits the V8 HEMI Challengers (R/T 5.7L, Scat Pack 6.4L, Hellcat 6.2L SC). Not the V6 SXT.
Required & Recommended Supporting Parts1 strongly recommended2 tips
1 strongly recommended2 tips
Strongly RecommendedECU Tuner / Programmer — Aftermarket intake manifold may require ECU tuning to optimize fuel mapping and idle quality.
+1 similar reason
- Aftermarket intake manifold changes airflow characteristics and may require ECU tuning for optimal performance.
SuggestedThrottle Body — Larger throttle body complements the improved airflow of a performance intake manifold.
+1 similar reason
- Consider upgrading throttle body to match the improved airflow capacity of the new manifold.
SuggestedFuel Injectors — Larger fuel injectors may be needed to support the increased airflow and power potential.
What Does This Do?
The Holley Long Runner Intake Manifold is a part that helps your Dodge Challenger's engine breathe better, improving performance by allowing more air and fuel to flow into the engine, especially at higher RPMs. Who it's for: This product is ideal for those looking to enhance their Challenger for high-performance street driving or racing. Trade-offs: Installing this manifold may lead to a louder engine noise and could require a tune to optimize performance.
Why Install This?
Benefits
- Noticeable power improvement you'll feel in daily driving and pulls
- Improved throttle response and engine sound
- Better airflow means the engine runs more efficiently, especially at high RPM
- Easy bolt-on installation — most people can do this in their driveway with basic tools
Things to Know
- Some intakes may cause check engine lights without a tune
Where does this go on the car?
Long Runner Intake Manifold changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install target (1)
- Intake Manifold
Included or supporting (1)
- Intake Manifold Gasketincluded
This Upgrade Covers 2 Areas
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Intake Manifold
Replaces stock
Intake Manifold Gasket
Included in kit
Specifications
2 attributes| Construction And Appearance | Made from durable cast aluminum, features billet fuel rails and an oil fill cap.1 |
| Installation | Straightforward installation with no need for drilling or modifications.1 |
Sources: 1AmericanMuscle
Tune Required
This part requires an ECU tune to function correctly. Without a tune, the engine computer won't adjust for the new part, potentially causing poor performance, check engine lights, or engine damage.
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
Best price
$598.95
at AmericanMuscle
Frequently Asked Questions
Will the Long Runner Intake Manifold fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the Long Runner Intake Manifold?
This is rated as an easy bolt-on install. Most owners complete it in a driveway with hand tools. A custom tune is required for safe operation.
Based on product data
Does the Long Runner Intake Manifold come with a warranty?
Yes — Limited 90-day warranty per the listing on americanmuscle. Refer to the retailer or manufacturer for the full terms before installation.
Based on product data
How much horsepower does the Long Runner Intake Manifold add?
On a stock vehicle this typically adds about 18 HP and 22 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Cold Air Intakes buyer's guide
How to pick cold air intakes for your Challenger — what matters, what doesn't, and what to avoid.
Other cold air intakes for your Challenger
Compare Side-by-SideK&N
Typhoon Cold Air Intake System
$422.99
+14
$176 cheaper
Airaid
MXP Series Cold Air Intake
$422.99
+15+17
3 HP less · $176 cheaper
Mopar
Performance Cold Air Intake
$595.68
+8+10
10 HP less · $3 cheaper
Comp Cams
Stage 1 Performance Camshaft
$1,236.95
+35+25
+17 HP more · $638 more
Mishimoto
Catch Can Kit
$160.95
$438 cheaper
aFe Power
Momentum GT Cold Air Intake (5.7L/6.4L)
$428.45
+18+18
Same HP gain · $171 cheaper