Back to Engine & Power
$75–$200 labor
Open full visualizer →
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
2022 Dodge Challenger SRT Hellcat(6.2L Supercharged HEMI V8)
Fits the V8 HEMI Challengers (R/T 5.7L, Scat Pack 6.4L, Hellcat 6.2L SC). Not the V6 SXT.
BBK Performance
87mm CNC Ported Throttle Body
MPN: 1940 · SKU: 1843-disambig-6
View on BBK Performance website4.6across 224 reviews
$571.99
+10
Horsepower
+12
Torque (ft-lbs)
1-year warranty
Estimated Install Cost
Total with part: $646.99–$771.99
Low Warranty Risk
50-State Legal
Heads upAn ECU relearn procedure is required.Source: AmericanMuscle
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
2022 Dodge Challenger SRT Hellcat(6.2L Supercharged HEMI V8)
Fits the V8 HEMI Challengers (R/T 5.7L, Scat Pack 6.4L, Hellcat 6.2L SC). Not the V6 SXT.
Required & Recommended Supporting Parts1 strongly recommended2 tips
1 strongly recommended2 tips
Strongly RecommendedIntake Manifold — 87mm throttle body with stock 80mm intake manifold creates a flow step that reduces performance gains.
View 1 suggestion
SuggestedECU Tune — Aftermarket throttle bodies show their full benefit only with a tune that takes advantage of the increased airflow.
SuggestedECU Tuner / Programmer — Larger throttle body benefits from ECU tuning to optimize air/fuel ratios and throttle response.
What Does This Do?
The BBK 87mm CNC Ported Throttle Body is a performance part that improves airflow to your engine, helping it to breathe better and potentially increasing horsepower and throttle response. Who it's for: This part is ideal for those looking to enhance their 2022 Dodge Challenger for a more spirited driving experience, whether as a daily driver or for weekend fun. Trade-offs: Installing this throttle body may result in a louder engine noise and could require a tune to optimize performance.
Why Install This?
Benefits
- Incremental gains that stack well with other bolt-on mods
- Sharper throttle response and slightly improved peak flow
- Pairs well with cold air intake for maximum intake tract flow
- Easy bolt-on installation — most people can do this in their driveway with basic tools
Where does this go on the car?
87mm CNC Ported Throttle Body changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install target (1)
- Throttle Body
Specifications
2 attributes| Bore Size | 85mm1 |
| Material | CNC machined 356 aluminum1 |
Sources: 1AmericanMuscle
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
This part isn't currently available from any of our tracked retailers.
All retailers were last verified 10h ago; the part may be back in stock soon. It may have been discontinued or temporarily out of stock. Browse the engine & power category for in-stock alternatives.
Frequently Asked Questions
Will the 87mm CNC Ported Throttle Body fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the 87mm CNC Ported Throttle Body?
This is rated as an easy bolt-on install. Most owners complete it in a driveway with hand tools.
Based on product data
Does the 87mm CNC Ported Throttle Body come with a warranty?
Yes — a 1-year limited warranty per the listing on americanmuscle. Refer to the retailer or manufacturer for the full terms before installation.
Based on product data
How much horsepower does the 87mm CNC Ported Throttle Body add?
On a stock vehicle this typically adds about 10 HP and 12 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Anything I need to know before installing the 87mm CNC Ported Throttle Body?
Key callouts from the retailer install notes: • An ECU relearn procedure is required.
Based on product data
Throttle Bodies buyer's guide
How to pick throttle bodies for your Challenger — what matters, what doesn't, and what to avoid.
Other throttle bodies for your Challenger
Compare Side-by-SideBBK Performance
90mm Cnc Throttle Body
$549.99
$22 cheaper
BBK
BBK 92mm Throttle Body
$599.99
$28 more
Mopar
92mm Throttle Body
$355.78
$216 cheaper
Granatelli Motor Sports
95mm Throttle Body
$648.38
$76 more
aFe Power
aFe Power 90mm Throttle Body
$469.80
$102 cheaper
aFe Power
Afe Power 80mm Throttle Body
$373.50
+13+14
+3 HP more · $198 cheaper