Back to Engine & Power
$50–$150 labor
Open full visualizer →
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
2022 Dodge Challenger SRT Hellcat(6.2L Supercharged HEMI V8)
Fits the V8 HEMI Challengers (R/T 5.7L, Scat Pack 6.4L, Hellcat 6.2L SC). Not the V6 SXT.
Airaid
MXP Series Cold Air Intake
MPN: AIR-355-317 · SKU: 350-317
View on Airaid website4.7across 1,778 reviews
$422.99
+15
Horsepower
+17
Torque (ft-lbs)
Lifetime warranty
Estimated Install Cost
Total with part: $472.99–$572.99
Low Warranty Risk
CARB Exempt
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
2022 Dodge Challenger SRT Hellcat(6.2L Supercharged HEMI V8)
Fits the V8 HEMI Challengers (R/T 5.7L, Scat Pack 6.4L, Hellcat 6.2L SC). Not the V6 SXT.
Required & Recommended Supporting Parts3 required1 strongly recommended1 tip
3 required1 strongly recommended1 tip
ConflictFuel Injectors — Supercharger requires larger fuel injectors to supply extra fuel under boost.
ConflictECU Tuner / Programmer — Supercharger requires ECU tuning to adjust fuel and timing maps for boost.
+1 similar reason
- Cold air intakes can benefit from a tune to optimize air/fuel ratios for maximum gains.
RequiredIn-Tank Fuel Pump — High-flow fuel pump needed to supply adequate fuel pressure under boost.
Strongly RecommendedSpark Plugs — Colder heat range spark plugs recommended for forced induction applications.
SuggestedRadiator — Upgraded radiator helps manage increased heat from supercharged engine.
Needs: Radiator
No linked products in the catalog yet.
What Does This Do?
The Airaid MXP Series Cold Air Intake is a performance upgrade that helps your engine breathe better by allowing more air into it, which can lead to increased horsepower and quicker acceleration. Who it's for: This product is ideal for drivers looking to enhance the performance of their 2022 Dodge Challenger, whether for daily driving or occasional spirited driving. Trade-offs: Installing this cold air intake may result in a slightly louder engine sound and could require a tune for optimal performance.
Why Install This?
Benefits
- Incremental gains that stack well with other bolt-on mods
- Improved throttle response and engine sound
- Better airflow means the engine runs more efficiently, especially at high RPM
- Easy bolt-on installation — most people can do this in their driveway with basic tools
Things to Know
- Some intakes may cause check engine lights without a tune
Where does this go on the car?
MXP Series Cold Air Intake changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install target (1)
- Cold Air Intake System
Included or supporting (3)
- Air Filter Elementincluded
- Air Filter Housingincluded
- Intake Tubeincluded
This Upgrade Covers 4 Areas
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Air Filter Element
Included in kit
Air Filter Housing
Included in kit
Intake Tube
Included in kit
Cold Air Intake System
Replaces stock
Specifications
2 attributes| Material | High-Density Polyethylene1 |
| Installation | Easy, no drilling required1 |
Sources: 1AmericanMuscle
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
Best price
$422.99
at AmericanMuscle
Frequently Asked Questions
Will the MXP Series Cold Air Intake fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the MXP Series Cold Air Intake?
This is rated as an easy bolt-on install. Most owners complete it in a driveway with hand tools.
Based on product data
Does the MXP Series Cold Air Intake come with a warranty?
Yes — a lifetime warranty per the listing on americanmuscle. Refer to the retailer or manufacturer for the full terms before installation.
Based on product data
How much horsepower does the MXP Series Cold Air Intake add?
On a stock vehicle this typically adds about 15 HP and 17 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Cold Air Intakes buyer's guide
How to pick cold air intakes for your Challenger — what matters, what doesn't, and what to avoid.
Other cold air intakes for your Challenger
Compare Side-by-SideK&N
Typhoon Cold Air Intake System
$422.99
+14
Mopar
Performance Cold Air Intake
$595.68
+8+10
7 HP less · $173 more
Comp Cams
Stage 1 Performance Camshaft
$1,236.95
+35+25
+20 HP more · $814 more
Holley
Long Runner Intake Manifold
$598.95
+18+22
+3 HP more · $176 more
Mishimoto
Catch Can Kit
$160.95
$262 cheaper
aFe Power
Momentum GT Cold Air Intake (5.7L/6.4L)
$428.45
+18+18
+3 HP more · $5 more