CarModPlanner2022 Challenger
PartsBy systemView in 3DBlogMy Build (0)
CarModPlanner

The free build planner for the 2022 Dodge Challenger. Browse performance parts, check compatibility, compare prices, and visualize your mods in 3D.

Browse Parts

Engine & PowerExhaust SystemsDrivetrainSuspensionBrakesWheels & Tires

Tools

Parts CatalogBrowse by SystemBuild Planner3D VisualizerCompare Parts

Learn

All ArticlesBuyer's GuidesSafety TipsBuild GuidesHow-To Articles

CarModPlanner is a free community resource for 2022 Dodge Challenger enthusiasts. Not affiliated with Stellantis, Dodge, or any retailer. Prices shown are sourced from third-party retailers and may not reflect current pricing.

Affiliate disclosure·We earn a commission on qualifying purchases through some retailer links.

HomeEngine & PowerCold Air Intakes
Back to Engine & Power
K&N Typhoon Cold Air Intake System for 2022 Dodge Challenger

First-time modders or complementing existing upgrades

Compatible Vehicles

2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
2022 Dodge Challenger SRT Hellcat(6.2L Supercharged HEMI V8)

Fits the V8 HEMI Challengers (R/T 5.7L, Scat Pack 6.4L, Hellcat 6.2L SC). Not the V6 SXT.

K&N

Typhoon Cold Air Intake System

MPN: 69-2545TP

View on K&N website
4.7across 830 reviews
$422.99

+14

Torque (ft-lbs)

Skill Level

Bolt-on

Install Time

Varies

View on Car

See replacement target on car →

Estimated Install Cost

$50–$150 labor

Total with part: $472.99–$572.99

Low Warranty Risk
CARB Exempt

First-time modders or complementing existing upgrades

Compatible Vehicles

2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
2022 Dodge Challenger SRT Hellcat(6.2L Supercharged HEMI V8)

Fits the V8 HEMI Challengers (R/T 5.7L, Scat Pack 6.4L, Hellcat 6.2L SC). Not the V6 SXT.

Required & Recommended Supporting Parts3 required1 strongly recommended1 tip
3 required1 strongly recommended1 tip

ConflictFuel Injectors — Supercharger requires larger fuel injectors to supply extra fuel under boost.

View 3 suggestions
DeatschWerksDeatschWerks 55lb/hr High-Flow Fuel Injectors (Set of 8)$1,449.00ProChargerProCharger P-1SC-1 High Output Supercharger Kit$6,674.00WhippleWhipple Gen 5 3.0L Supercharger Kit$8,899.99

ConflictECU Tuner / Programmer — Supercharger requires ECU tuning to adjust fuel and timing maps for boost.

+1 similar reason
  • Cold air intakes can benefit from a tune to optimize air/fuel ratios for maximum gains.
View 3 suggestions
HP TunersHP Tuners MPVI3 Standard Kit$349.99DiabloSportDiabloSport inTune i3 Platinum Programmer$475.95DiabloSportDiabloSport Predator 2 Programmer$532.95

RequiredIn-Tank Fuel Pump — High-flow fuel pump needed to supply adequate fuel pressure under boost.

View 2 suggestions
DeatschWerksDeatschWerks 340 LPH In-Tank Fuel Pump$189.00DeatschWerksDeatschWerks DW400 In-Tank Fuel Pump (415 LPH)

Strongly RecommendedSpark Plugs — Colder heat range spark plugs recommended for forced induction applications.

View 3 suggestions
DENSODENSO U-Groove Spark Plug (W20EPR-U)$3.99AutoliteAutolite Platinum Spark Plug AP5324$4.49AutoliteAutolite Platinum Spark Plug AP66$4.99

SuggestedRadiator — Upgraded radiator helps manage increased heat from supercharged engine.

Needs: Radiator

No linked products in the catalog yet.

What Does This Do?

Tubular cold-air intake with a high-flow oiled cotton filter. Who it's for: Anyone starting their first build. Audible, easy to install, modest power gain. Trade-offs: Filter needs cleaning and re-oiling every 30k miles.

Why Install This?

Benefits

  • Incremental gains that stack well with other bolt-on mods
  • Improved throttle response and engine sound
  • Better airflow means the engine runs more efficiently, especially at high RPM
  • Easy bolt-on installation — most people can do this in their driveway with basic tools

Things to Know

  • Some intakes may cause check engine lights without a tune

Where does this go on the car?

Typhoon Cold Air Intake System changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.

Open full visualizer →

Loading 3D scene

0%

Red = primary stock component changed

Primary install target (1)

  • Cold Air Intake System

Included or supporting (3)

  • Air Filter Elementincluded
  • Air Filter Housingincluded
  • Intake Tubeincluded

This Upgrade Covers 4 Areas

The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.

Air Filter Element

Included in kit

Air Filter Housing

Included in kit

Intake Tube

Included in kit

Cold Air Intake System

Replaces stock

Price Comparison

Compare prices across 1 retailer — every link opens the real product page

Best price
$422.99
at AmericanMuscle
Best PriceAmericanMuscle
Verified 11h ago
$422.99

Frequently Asked Questions

Will the Typhoon Cold Air Intake System fit my car?

Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.

Based on product data

How hard is it to install the Typhoon Cold Air Intake System?

This is rated as an easy bolt-on install. Most owners complete it in a driveway with hand tools.

Based on product data

Cold Air Intakes buyer's guide

How to pick cold air intakes for your Challenger — what matters, what doesn't, and what to avoid.

Install instructions, videos, sound clips, and reference docs collected from the manufacturer and retailers.

  • Install instructions — How to Install K&N Series 69 Typhoon Cold Air Intake (11-23 6.4 L HEMI Challenger
    Opens Guides

Other cold air intakes for your Challenger

Compare Side-by-Side
Airaid MXP Series Cold Air Intake

Airaid

MXP Series Cold Air Intake

$422.99
+15+17
Mopar Performance Cold Air Intake

Mopar

Performance Cold Air Intake

$595.68
+8+10
$173 more
Comp Cams Stage 1 Performance Camshaft

Comp Cams

Stage 1 Performance Camshaft

$1,236.95
+35+25
$814 more
Holley Long Runner Intake Manifold

Holley

Long Runner Intake Manifold

$598.95
+18+22
$176 more
Mishimoto Catch Can Kit

Mishimoto

Catch Can Kit

$160.95
$262 cheaper
aFe Power Momentum GT Cold Air Intake (5.7L/6.4L)

aFe Power

Momentum GT Cold Air Intake (5.7L/6.4L)

$428.45
+18+18
$5 more