Back to Exhaust
$200–$500 labor
Open full visualizer →
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
Fits 2009-2023 Challenger 5.7L and 6.4L HEMI.
BBK Performance
1-7/8" Shorty Headers (5.7L/6.4L)
MPN: 4013
View on BBK Performance website5.0across 3 reviews
$499.99
+15
Torque (ft-lbs)
1-year warranty
Skill Level
Advanced
Install Time
4-6 hours
Build Stage
Stage 2 — Supporting Mods
View on Car
See replacement target on car →Estimated Install Cost
Total with part: $699.99–$999.99
Emissions Warranty Risk
Off-Road Use Only
Sound Level
moderate
Headers change the exhaust tone character — deeper with more top-end rasp. Long tubes are louder than shorties.
What You'll Need
Tune recommended. Lift recommended but not required.
CautionNot CARB certified for CaliforniaSource: AmericanMuscle
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
Fits 2009-2023 Challenger 5.7L and 6.4L HEMI.
Required & Recommended Supporting Parts2 required1 strongly recommended1 tip
2 required1 strongly recommended1 tip
ConflictMid-Pipe — Long tube headers require a catted or off-road mid-pipe to complete the exhaust path.
RequiredO2 Sensors — Long tube headers relocate O2 sensors and may require extensions or new sensors.
Needs: O2 Sensors
No linked products in the catalog yet.
Strongly RecommendedECU Tuner / Programmer — Headers change exhaust flow and may require a tune to prevent lean conditions and optimize performance.
SuggestedExhaust Gaskets — Fresh exhaust gaskets ensure proper sealing at header connections.
+1 similar reason
- New exhaust gaskets ensure proper sealing and prevent leaks at header connections.
Needs: Exhaust Gaskets
No linked products in the catalog yet.
What Does This Do?
BBK's shorty headers are the practical choice for HEMI owners who want header gains without the complexity of long tubes. 'Shorty' means the primary tubes are shorter and the collectors end where the factory manifolds do — so they bolt directly to your existing mid-pipes and cat-back exhaust. No matching mid-pipe purchase needed. The 1-5/8" primaries are a good size for the 5.7 L and work well on the 6.4 L too. You'll see about half the HP gains of long tubes (15-20 HP vs 25-40 HP), but the install is easier and you maintain more flexibility with your exhaust setup. Still requires a tune for full benefit.
Why Install This?
Benefits
- Incremental gains that stack well with other bolt-on mods
- Headers are one of the best power-per-dollar exhaust upgrades
- Long tubes offer more power but are harder to install; shorty headers are easier but give less gain
Things to Know
- Long tube headers typically require a tune for best results
- May affect emissions compliance depending on your state
- Professional installation recommended — requires specialty tools or expertise
Where does this go on the car?
1-7/8" Shorty Headers (5.7L/6.4L) changes 2 primary stock components (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install targets (2)
- Headers
- Shorty Headers
This Upgrade Covers 2 Areas
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Headers
Replaces stock
Shorty Headers
Replaces stock
Specifications
4 attributes| Material | Stainless Steel1 |
| Finish | Titanium Ceramic1 |
| Diameter | 1-7/8 inch1 |
| Not CARB Certified | Yes1 |
Sources: 1AmericanMuscle
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
Best price
$499.99
at AmericanMuscle
Frequently Asked Questions
Will the 1-7/8" Shorty Headers (5.7 L/6.4 L) fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the 1-7/8" Shorty Headers (5.7 L/6.4 L)?
This is rated as a professional-level install (4-6 hours). We recommend a professional shop with the right lift and tooling.
Based on product data
Does the 1-7/8" Shorty Headers (5.7 L/6.4 L) come with a warranty?
Yes — a 1-year limited warranty per the listing on americanmuscle. Refer to the retailer or manufacturer for the full terms before installation.
Based on product data
Anything I need to know before installing the 1-7/8" Shorty Headers (5.7 L/6.4 L)?
Key callouts from the retailer install notes: • Not CARB certified for California
Based on product data
Do I need anything else to install the 1-7/8" Shorty Headers (5.7 L/6.4 L)?
Plan on having or sourcing: Tune recommended. Lift recommended but not required.. The build planner on this site flags missing supporting parts when you add this kit to a build.
Based on product data
Headers buyer's guide
How to pick headers for your Challenger — what matters, what doesn't, and what to avoid.
Install instructions, videos, sound clips, and reference docs collected from the manufacturer and retailers.
Other headers for your Challenger
Compare Side-by-SideAmerican Racing Headers
1-7/8" Long Tube Headers
$2,343.54
+30+25
$1844 more
aFe Power
Twisted Steel Long Tube Headers
$1,515.60
+25+30
$1016 more
Kooks Headers
1-7/8" x 3" Long Tube Headers & OEM Catted Mid Pipes
$2,757.30
$2257 more
BBK Performance
1-7/8-Inch Long Tube Headers - Titanium Ceramic
$799.99
$300 more
American Racing Headers
Headers for Dodge Challenger 6.4L 392
$1,927.74
$1428 more
Stainless Works
Long Tube Headers and Mid Pipes
$2,560.25
$2060 more