Back to Engine & Power
Open full visualizer →
Great entry-level mod for any build
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
Fits the R/T (5.7L HEMI) only.
Airaid
MXP Series Cold Air Intake with Red SynthaFlow Oiled Filter
MPN: AIR-350-318 · SKU: CH3254
View on Airaid website4.7across 1,778 reviews
$369.99
Lifetime warranty
Great entry-level mod for any build
Compatible Vehicles
2022 Dodge Challenger R/T(5.7L HEMI V8)
Fits the R/T (5.7L HEMI) only.
Required & Recommended Supporting Parts3 required1 strongly recommended1 tip
3 required1 strongly recommended1 tip
ConflictFuel Injectors — Supercharger requires larger fuel injectors to supply extra fuel under boost.
ConflictECU Tuner / Programmer — Supercharger requires ECU tuning to adjust fuel and timing maps for boost.
+1 similar reason
- Cold air intakes can benefit from a tune to optimize air/fuel ratios for maximum gains.
RequiredIn-Tank Fuel Pump — High-flow fuel pump needed to supply adequate fuel pressure under boost.
Strongly RecommendedSpark Plugs — Colder heat range spark plugs recommended for forced induction applications.
SuggestedRadiator — Upgraded radiator helps manage increased heat from supercharged engine.
Needs: Radiator
No linked products in the catalog yet.
What Does This Do?
The Airaid MXP Series Cold Air Intake is a part that helps your engine get cooler, cleaner air, which can improve horsepower and torque. It's designed for easy installation and doesn't require any computer tuning after it's added. Who it's for: This product is great for anyone looking to enhance their daily driver or weekend car without needing extensive modifications. Trade-offs: After installation, you might notice a slightly louder engine sound, but you'll benefit from better engine performance.
Why Install This?
Benefits
- Improved throttle response and engine sound
- Better airflow means the engine runs more efficiently, especially at high RPM
- Easy bolt-on installation — most people can do this in their driveway with basic tools
Things to Know
- Some intakes may cause check engine lights without a tune
Where does this go on the car?
MXP Series Cold Air Intake with Red SynthaFlow Oiled Filter changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install target (1)
- Cold Air Intake System
Included or supporting (3)
- Air Filter Elementincluded
- Air Filter Housingincluded
- Intake Tubeincluded
This Upgrade Covers 4 Areas
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Air Filter Element
Included in kit
Air Filter Housing
Included in kit
Intake Tube
Included in kit
Cold Air Intake System
Replaces stock
Specifications
3 attributes| Material | High-Density Cross-Linked Polyethylene1 |
| Filter Type | SynthaFlow Oiled Filter1 |
| CARB Certification | Yes1 |
Sources: 1AmericanMuscle
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
Best price
$369.99
at AmericanMuscle
Frequently Asked Questions
Will the MXP Series Cold Air Intake with Red Syntha Flow Oiled Filter fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the MXP Series Cold Air Intake with Red Syntha Flow Oiled Filter?
This is rated as an easy bolt-on install. Most owners complete it in a driveway with hand tools.
Based on product data
Does the MXP Series Cold Air Intake with Red Syntha Flow Oiled Filter come with a warranty?
Yes — a lifetime warranty per the listing on americanmuscle. Refer to the retailer or manufacturer for the full terms before installation.
Based on product data
Cold Air Intakes buyer's guide
How to pick cold air intakes for your Challenger — what matters, what doesn't, and what to avoid.
Other cold air intakes for your Challenger
Compare Side-by-SideK&N
Typhoon Cold Air Intake System
$422.99
+14
$53 more
Airaid
MXP Series Cold Air Intake
$422.99
+15+17
$53 more
Mopar
Performance Cold Air Intake
$595.68
+8+10
$226 more
Comp Cams
Stage 1 Performance Camshaft
$1,236.95
+35+25
$867 more
Holley
Long Runner Intake Manifold
$598.95
+18+22
$229 more
Mishimoto
Catch Can Kit
$160.95
$209 cheaper