Back to Engine & Power
Open full visualizer →
Great entry-level mod for any build
Compatible Vehicles
2022 Dodge Challenger SXT(3.6L Pentastar V6)
Fits the SXT V6 (3.6L Pentastar V6) only.
Airaid
Cold Air Dam Intake with Yellow SynthaMax Dry Filter
MPN: AIR-355-210 · SKU: CH20828-36
View on Airaid website4.8across 56 reviews
$422.99
Lifetime warranty
Great entry-level mod for any build
Compatible Vehicles
2022 Dodge Challenger SXT(3.6L Pentastar V6)
Fits the SXT V6 (3.6L Pentastar V6) only.
Required & Recommended Supporting Parts3 required1 strongly recommended1 tip
3 required1 strongly recommended1 tip
ConflictFuel Injectors — Supercharger requires larger fuel injectors to supply extra fuel under boost.
ConflictECU Tuner / Programmer — Supercharger requires ECU tuning to adjust fuel and timing maps for boost.
+1 similar reason
- Cold air intakes can benefit from a tune to optimize air/fuel ratios for maximum gains.
RequiredIn-Tank Fuel Pump — High-flow fuel pump needed to supply adequate fuel pressure under boost.
Strongly RecommendedSpark Plugs — Colder heat range spark plugs recommended for forced induction applications.
SuggestedRadiator — Upgraded radiator helps manage increased heat from supercharged engine.
Needs: Radiator
No linked products in the catalog yet.
What Does This Do?
The Airaid Cold Air Dam Intake is an aftermarket part that helps your 2022 Dodge Challenger breathe better by allowing cooler air into the engine, which can improve horsepower and torque for better acceleration. Who it's for: This product is ideal for drivers looking to enhance their daily driving experience or those planning a performance build. Trade-offs: Installing this intake may result in a slightly louder engine sound and could require an engine tune to maximize its benefits.
Why Install This?
Benefits
- Improved throttle response and engine sound
- Better airflow means the engine runs more efficiently, especially at high RPM
- Easy bolt-on installation — most people can do this in their driveway with basic tools
Things to Know
- Some intakes may cause check engine lights without a tune
Where does this go on the car?
Cold Air Dam Intake with Yellow SynthaMax Dry Filter changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install target (1)
- Cold Air Intake System
Included or supporting (3)
- Air Filter Elementincluded
- Air Filter Housingincluded
- Intake Tubeincluded
This Upgrade Covers 4 Areas
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Air Filter Element
Included in kit
Air Filter Housing
Included in kit
Intake Tube
Included in kit
Cold Air Intake System
Replaces stock
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
Best price
$422.99
at AmericanMuscle
Frequently Asked Questions
Will the Cold Air Dam Intake with Yellow Syntha Max Dry Filter fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the Cold Air Dam Intake with Yellow Syntha Max Dry Filter?
This is rated as an easy bolt-on install. Most owners complete it in a driveway with hand tools.
Based on product data
Does the Cold Air Dam Intake with Yellow Syntha Max Dry Filter come with a warranty?
Yes — a lifetime warranty per the listing on americanmuscle. Refer to the retailer or manufacturer for the full terms before installation.
Based on product data
Cold Air Intakes buyer's guide
How to pick cold air intakes for your Challenger — what matters, what doesn't, and what to avoid.
Other cold air intakes for your Challenger
Compare Side-by-Side
