Back to Engine & Power
Open full visualizer →
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
Fits the Scat Pack (6.4L HEMI) only.
aFe Power
Momentum GT Cold Air Intake System w/Pro 5R Filter
MPN: 54-72203
View on aFe Power website$383.35
+16
Horsepower
+15
Torque (ft-lbs)
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
Fits the Scat Pack (6.4L HEMI) only.
Required & Recommended Supporting Parts3 required1 strongly recommended1 tip
3 required1 strongly recommended1 tip
ConflictFuel Injectors — Supercharger requires larger fuel injectors to supply extra fuel under boost.
ConflictECU Tuner / Programmer — Supercharger requires ECU tuning to adjust fuel and timing maps for boost.
+1 similar reason
- Cold air intakes can benefit from a tune to optimize air/fuel ratios for maximum gains.
RequiredIn-Tank Fuel Pump — High-flow fuel pump needed to supply adequate fuel pressure under boost.
Strongly RecommendedSpark Plugs — Colder heat range spark plugs recommended for forced induction applications.
SuggestedRadiator — Upgraded radiator helps manage increased heat from supercharged engine.
Needs: Radiator
No linked products in the catalog yet.
What Does This Do?
A cold air intake system replaces your stock air filter and intake tube with a larger, less restrictive setup that pulls cooler air from outside the engine bay, allowing your 6.4 L HEMI to breathe better and make more power. Who it's for: Daily drivers and weekend enthusiasts who want a simple bolt-on power upgrade that adds around 16 horsepower without major modifications. Trade-offs: You'll gain noticeable throttle response and a deeper intake sound, but the engine bay will be slightly louder and you may need to clean the reusable filter periodically.
Why Install This?
Benefits
- Incremental gains that stack well with other bolt-on mods
- Improved throttle response and engine sound
- Better airflow means the engine runs more efficiently, especially at high RPM
- Easy bolt-on installation — most people can do this in their driveway with basic tools
Things to Know
- Some intakes may cause check engine lights without a tune
Where does this go on the car?
Momentum GT Cold Air Intake System w/Pro 5R Filter changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install target (1)
- Cold Air Intake System
Included or supporting (3)
- Air Filter Elementincluded
- Air Filter Housingincluded
- Intake Tubeincluded
This Upgrade Covers 4 Areas
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Air Filter Element
Included in kit
Air Filter Housing
Included in kit
Intake Tube
Included in kit
Cold Air Intake System
Replaces stock
Specifications
2 attributes| Roto Molded Tube | This system uses a computer designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.1 |
| Premium Hardware | Premium stainless steel T-bolt clamps and a reinforced silicone hump coupling are used for strength and durability.1 |
Sources: 1Afepower
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
Best price
$383.35
at aFe Power
Frequently Asked Questions
Will the Momentum GT Cold Air Intake System w/Pro 5 R Filter fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the Momentum GT Cold Air Intake System w/Pro 5 R Filter?
This is rated as an easy bolt-on install. Most owners complete it in a driveway with hand tools.
Based on product data
How much horsepower does the Momentum GT Cold Air Intake System w/Pro 5 R Filter add?
On a stock vehicle this typically adds about 16 HP and 15 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Cold Air Intakes buyer's guide
How to pick cold air intakes for your Challenger — what matters, what doesn't, and what to avoid.
Other cold air intakes for your Challenger
Compare Side-by-SideK&N
Typhoon Cold Air Intake System
$422.99
+14
$40 more
Airaid
MXP Series Cold Air Intake
$422.99
+15+17
1 HP less · $40 more
Mopar
Performance Cold Air Intake
$595.68
+8+10
8 HP less · $212 more
Comp Cams
Stage 1 Performance Camshaft
$1,236.95
+35+25
+19 HP more · $854 more
Holley
Long Runner Intake Manifold
$598.95
+18+22
+2 HP more · $216 more
Mishimoto
Catch Can Kit
$160.95
$222 cheaper