Back to Engine & Power
Open full visualizer →
Enthusiast builds balancing power and reliability
Compatible Vehicles
2022 Dodge Challenger SXT(3.6L Pentastar V6)
Fits the SXT V6 (3.6L Pentastar V6) only.
aFe Power
Momentum GT Cold Air Intake System w/Pro 5R Filter
MPN: 54-72201
View on aFe Power website$383.35
+18
Horsepower
+22
Torque (ft-lbs)
Heads upKit will not fit vehicle with factory HID headlights.Source: Afepower
Enthusiast builds balancing power and reliability
Compatible Vehicles
2022 Dodge Challenger SXT(3.6L Pentastar V6)
Fits the SXT V6 (3.6L Pentastar V6) only.
Required & Recommended Supporting Parts3 required1 strongly recommended1 tip
3 required1 strongly recommended1 tip
ConflictFuel Injectors — Supercharger requires larger fuel injectors to supply extra fuel under boost.
ConflictECU Tuner / Programmer — Supercharger requires ECU tuning to adjust fuel and timing maps for boost.
+1 similar reason
- Cold air intakes can benefit from a tune to optimize air/fuel ratios for maximum gains.
RequiredIn-Tank Fuel Pump — High-flow fuel pump needed to supply adequate fuel pressure under boost.
Strongly RecommendedSpark Plugs — Colder heat range spark plugs recommended for forced induction applications.
SuggestedRadiator — Upgraded radiator helps manage increased heat from supercharged engine.
Needs: Radiator
No linked products in the catalog yet.
What Does This Do?
Dodge Challenger/Charger 11-23/Chrysler 300 11-14 V6-3.6 L
Why Install This?
Benefits
- Noticeable power improvement you'll feel in daily driving and pulls
- Improved throttle response and engine sound
- Better airflow means the engine runs more efficiently, especially at high RPM
- Easy bolt-on installation — most people can do this in their driveway with basic tools
Things to Know
- Some intakes may cause check engine lights without a tune
Where does this go on the car?
Momentum GT Cold Air Intake System w/Pro 5R Filter changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install target (1)
- Cold Air Intake System
Included or supporting (3)
- Air Filter Elementincluded
- Air Filter Housingincluded
- Intake Tubeincluded
This Upgrade Covers 4 Areas
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Air Filter Element
Included in kit
Air Filter Housing
Included in kit
Intake Tube
Included in kit
Cold Air Intake System
Replaces stock
Specifications
2 attributes| Roto Molded Tube | This system uses a computer designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.1 |
| Premium Hardware | Premium stainless steel T-bolt clamps and a reinforced silicone couplings are used for strength and durability.1 |
Sources: 1Afepower
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
Best price
$383.35
at aFe Power
Frequently Asked Questions
Will the Momentum GT Cold Air Intake System w/Pro 5 R Filter fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the Momentum GT Cold Air Intake System w/Pro 5 R Filter?
This is rated as an easy bolt-on install. Most owners complete it in a driveway with hand tools.
Based on product data
How much horsepower does the Momentum GT Cold Air Intake System w/Pro 5 R Filter add?
On a stock vehicle this typically adds about 18 HP and 22 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Anything I need to know before installing the Momentum GT Cold Air Intake System w/Pro 5 R Filter?
Key callouts from the retailer install notes: • Kit will not fit vehicle with factory HID headlights.
Based on product data
Cold Air Intakes buyer's guide
How to pick cold air intakes for your Challenger — what matters, what doesn't, and what to avoid.
Other cold air intakes for your Challenger
Compare Side-by-SideK&N
Typhoon Cold Air Intake System
$422.99
+14
$40 more
Airaid
MXP Series Cold Air Intake
$422.99
+15+17
3 HP less · $40 more
Mopar
Performance Cold Air Intake
$595.68
+8+10
10 HP less · $212 more
Comp Cams
Stage 1 Performance Camshaft
$1,236.95
+35+25
+17 HP more · $854 more
Holley
Long Runner Intake Manifold
$598.95
+18+22
Same HP gain · $216 more
Mishimoto
Catch Can Kit
$160.95
$222 cheaper