Back to Engine & Power
Open full visualizer →
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger SXT(3.6L Pentastar V6)
Fits the SXT V6 (3.6L Pentastar V6) only.
aFe Power
Magnum FORCE Stage-2 Cold Air Intake System w/Pro DRY S Filter
MPN: 51-12152-B
View on aFe Power website$369.75
+13
Horsepower
+17
Torque (ft-lbs)
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger SXT(3.6L Pentastar V6)
Fits the SXT V6 (3.6L Pentastar V6) only.
Required & Recommended Supporting Parts3 required1 strongly recommended1 tip
3 required1 strongly recommended1 tip
ConflictFuel Injectors — Supercharger requires larger fuel injectors to supply extra fuel under boost.
ConflictECU Tuner / Programmer — Supercharger requires ECU tuning to adjust fuel and timing maps for boost.
+1 similar reason
- Cold air intakes can benefit from a tune to optimize air/fuel ratios for maximum gains.
RequiredIn-Tank Fuel Pump — High-flow fuel pump needed to supply adequate fuel pressure under boost.
Strongly RecommendedSpark Plugs — Colder heat range spark plugs recommended for forced induction applications.
SuggestedRadiator — Upgraded radiator helps manage increased heat from supercharged engine.
Needs: Radiator
No linked products in the catalog yet.
What Does This Do?
A cold air intake system replaces your stock air filter and intake tube with a larger, less restrictive setup that allows your engine to breathe in more air, which can increase horsepower and torque. Who it's for: Daily drivers and weekend enthusiasts who want a simple bolt-on modification that adds some power without major changes to the car. Trade-offs: You'll gain around 13 horsepower and slightly better throttle response, but the engine will be noticeably louder and you'll need to clean/replace the filter more often than a stock paper filter.
Why Install This?
Benefits
- Incremental gains that stack well with other bolt-on mods
- Improved throttle response and engine sound
- Better airflow means the engine runs more efficiently, especially at high RPM
- Easy bolt-on installation — most people can do this in their driveway with basic tools
Things to Know
- Some intakes may cause check engine lights without a tune
Where does this go on the car?
Magnum FORCE Stage-2 Cold Air Intake System w/Pro DRY S Filter changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install target (1)
- Cold Air Intake System
Included or supporting (3)
- Air Filter Elementincluded
- Air Filter Housingincluded
- Intake Tubeincluded
This Upgrade Covers 4 Areas
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Air Filter Element
Included in kit
Air Filter Housing
Included in kit
Intake Tube
Included in kit
Cold Air Intake System
Replaces stock
Specifications
5 attributes| Horsepower Gain | up to 13 horsepower1 |
| Torque Gain | 17 lbs. x ft. of torque1 |
| Outflow | outflowed the factory intake by 37%1 |
| Filter Type | oil-free Pro DRY S filter1 |
| Installation | direct bolt-on kit, requires no cutting or drilling1 |
Sources: 1Afepower
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
Best price
$369.75
at aFe Power
Frequently Asked Questions
Will the Magnum FORCE Stage-2 Cold Air Intake System w/Pro DRY S Filter fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the Magnum FORCE Stage-2 Cold Air Intake System w/Pro DRY S Filter?
This is rated as an easy bolt-on install. Most owners complete it in a driveway with hand tools.
Based on product data
How much horsepower does the Magnum FORCE Stage-2 Cold Air Intake System w/Pro DRY S Filter add?
On a stock vehicle this typically adds about 13 HP and 17 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Cold Air Intakes buyer's guide
How to pick cold air intakes for your Challenger — what matters, what doesn't, and what to avoid.
Other cold air intakes for your Challenger
Compare Side-by-SideK&N
Typhoon Cold Air Intake System
$422.99
+14
$53 more
Airaid
MXP Series Cold Air Intake
$422.99
+15+17
+2 HP more · $53 more
Mopar
Performance Cold Air Intake
$595.68
+8+10
5 HP less · $226 more
Comp Cams
Stage 1 Performance Camshaft
$1,236.95
+35+25
+22 HP more · $867 more
Holley
Long Runner Intake Manifold
$598.95
+18+22
+5 HP more · $229 more
Mishimoto
Catch Can Kit
$160.95
$209 cheaper