
Enthusiast builds balancing power and reliability
Fits the Hellcat (6.2L Supercharged HEMI) only.
aFe Power
MPN: 54-12852R
View on aFe Power website+37
Horsepower
+33
Torque (ft-lbs)
Enthusiast builds balancing power and reliability
Fits the Hellcat (6.2L Supercharged HEMI) only.
ConflictFuel Injectors — Supercharger requires larger fuel injectors to supply extra fuel under boost.
ConflictECU Tuner / Programmer — Supercharger requires ECU tuning to adjust fuel and timing maps for boost.
RequiredIn-Tank Fuel Pump — High-flow fuel pump needed to supply adequate fuel pressure under boost.
Strongly RecommendedSpark Plugs — Colder heat range spark plugs recommended for forced induction applications.
SuggestedRadiator — Upgraded radiator helps manage increased heat from supercharged engine.
No linked products in the catalog yet.
A cold air intake system that replaces your stock air filter and intake tube with a larger, less restrictive setup that pulls cooler air from outside the engine bay to help your engine breathe better. Who it's for: Hellcat owners looking for their first performance mod that adds noticeable power without major engine work. Trade-offs: Adds around 37 horsepower and makes the engine sound more aggressive, but creates a louder intake noise that you'll hear in the cabin during acceleration.
Magnum FORCE Stage-2 Cold Air Intake System w/Pro 5R Filter changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Air Filter Element
Included in kit
Air Filter Housing
Included in kit
Intake Tube
Included in kit
Cold Air Intake System
Replaces stock
Specifications
4 attributes| Flange Size | 7"1 |
| Filter Type | Pre-oiled, 6-3/4" tall inverted top conical1 |
| Material | XLPE (cross-linked polyethylene)1 |
| Heat Shield | 18-gauge powder-coated1 |
Sources: 1Afepower
Compare prices across 1 retailer — every link opens the real product page
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
This is rated as an intermediate install. Plan for a half-day with hand tools and basic mechanical experience.
Based on product data
On a stock vehicle this typically adds about 37 HP and 33 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Key callouts from the retailer install notes: • Will not fit Challenger SRT Demon and SRT Hellcat Redeye.
Based on product data
Cold Air Intakes buyer's guide
How to pick cold air intakes for your Challenger — what matters, what doesn't, and what to avoid.
Other cold air intakes for your Challenger
Compare Side-by-Side
K&N
Typhoon Cold Air Intake System

Airaid
MXP Series Cold Air Intake

Mopar
Performance Cold Air Intake

Comp Cams
Stage 1 Performance Camshaft

Holley
Long Runner Intake Manifold

Mishimoto
Catch Can Kit