
Enthusiast builds balancing power and reliability
Fits the Scat Pack (6.4L HEMI) only.
aFe Power
MPN: 54-12172
View on aFe Power website+18
Horsepower
+22
Torque (ft-lbs)
Enthusiast builds balancing power and reliability
Fits the Scat Pack (6.4L HEMI) only.
ConflictFuel Injectors — Supercharger requires larger fuel injectors to supply extra fuel under boost.
ConflictECU Tuner / Programmer — Supercharger requires ECU tuning to adjust fuel and timing maps for boost.
RequiredIn-Tank Fuel Pump — High-flow fuel pump needed to supply adequate fuel pressure under boost.
Strongly RecommendedSpark Plugs — Colder heat range spark plugs recommended for forced induction applications.
SuggestedRadiator — Upgraded radiator helps manage increased heat from supercharged engine.
No linked products in the catalog yet.
A cold air intake system that replaces your stock air filter and intake tube with a larger, less restrictive setup that pulls cooler air from outside the engine bay to help your engine breathe better. Who it's for: Daily drivers and weekend enthusiasts who want a simple bolt-on modification that adds some power and changes the engine sound without major modifications. Trade-offs: Makes the engine noticeably louder under acceleration and requires periodic cleaning of the reusable filter, but provides a modest power increase and improved throttle response.
Magnum Force Stage-2 Cold Air Intake System w/Pro 5R Filter changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Air Filter Element
Included in kit
Air Filter Housing
Included in kit
Intake Tube
Included in kit
Cold Air Intake System
Replaces stock
Specifications
6 attributes| Max Horsepower | 181 |
| Max Torque | 22 lbs. x ft.1 |
| Out Flow | 12%1 |
| Heat Shield Material | 18-gauge powder-coated1 |
| Filter Type | Washable/reusable oiled conical1 |
| Installation | Hassle-free installation using factory mounting locations1 |
Sources: 1Afepower
Compare prices across 1 retailer — every link opens the real product page
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
This is rated as an intermediate install. Plan for a half-day with hand tools and basic mechanical experience.
Based on product data
On a stock vehicle this typically adds about 18 HP and 22 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Key callouts from the retailer install notes: • Will not fit Challenger or Charger models equipped with the Shaker hood. • Requires intake tube modification if using a throttle body spacer.
Based on product data
Cold Air Intakes buyer's guide
How to pick cold air intakes for your Challenger — what matters, what doesn't, and what to avoid.
Other cold air intakes for your Challenger
Compare Side-by-Side
K&N
Typhoon Cold Air Intake System

Airaid
MXP Series Cold Air Intake

Mopar
Performance Cold Air Intake

Comp Cams
Stage 1 Performance Camshaft

Holley
Long Runner Intake Manifold

Mishimoto
Catch Can Kit