Back to Engine & Power
$50–$150 labor
Open full visualizer →
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
Fits 2011-2023 Challenger 6.4L HEMI only.
aFe Power
Magnum Force Stage-2 Intake (6.4L)
MPN: 51-12172-C · SKU: 54-12862
View on aFe Power website4.7across 172 reviews
$697.00
+15
Horsepower
+14
Torque (ft-lbs)
2-year warranty
Skill Level
Bolt-on
Install Time
30-45 minutes
Build Stage
Stage 1 — Basic Bolt-Ons
View on Car
See replacement target on car →Estimated Install Cost
Total with part: $747.00–$847.00
Low Warranty Risk
CARB Exempt
What You'll Need
Basic hand tools. No other mods required.
First-time modders or complementing existing upgrades
Compatible Vehicles
2022 Dodge Challenger R/T Scat Pack(6.4L HEMI V8)
Fits 2011-2023 Challenger 6.4L HEMI only.
Required & Recommended Supporting Parts3 required1 strongly recommended1 tip
3 required1 strongly recommended1 tip
ConflictFuel Injectors — Supercharger requires larger fuel injectors to supply extra fuel under boost.
ConflictECU Tuner / Programmer — Supercharger requires ECU tuning to adjust fuel and timing maps for boost.
+1 similar reason
- Cold air intakes can benefit from a tune to optimize air/fuel ratios for maximum gains.
RequiredIn-Tank Fuel Pump — High-flow fuel pump needed to supply adequate fuel pressure under boost.
Strongly RecommendedSpark Plugs — Colder heat range spark plugs recommended for forced induction applications.
SuggestedRadiator — Upgraded radiator helps manage increased heat from supercharged engine.
Needs: Radiator
No linked products in the catalog yet.
What Does This Do?
The Magnum FORCE Stage-2 uses a fully sealed airbox that isolates the filter from engine heat, pulling only cold air from the fender area. The Pro DRY S filter requires no oiling — just rinse and reuse. This is the best choice if you want a maintenance-free intake that still makes meaningful power. It won't flow quite as much as an oiled filter intake, but you never have to worry about over-oiling the filter and contaminating your MAF sensor.
Why Install This?
Benefits
- Incremental gains that stack well with other bolt-on mods
- Improved throttle response and engine sound
- Better airflow means the engine runs more efficiently, especially at high RPM
- Easy bolt-on installation — most people can do this in their driveway with basic tools
Things to Know
- Some intakes may cause check engine lights without a tune
Where does this go on the car?
Magnum Force Stage-2 Intake (6.4L) changes 1 primary stock component (highlighted red). Included or supporting pieces are listed below.
Loading 3D scene
0%
Red = primary stock component changed
Primary install target (1)
- Cold Air Intake System
Included or supporting (3)
- Air Filter Elementincluded
- Air Filter Housingincluded
- Intake Tubeincluded
This Upgrade Covers 4 Areas
The build planner counts these as covered so you don't double-pay for parts this upgrade already addresses.
Air Filter Element
Included in kit
Air Filter Housing
Included in kit
Intake Tube
Included in kit
Cold Air Intake System
Replaces stock
Specifications
2 attributes| Installation | Does not require professional installation, takes no more than 1 hour1 |
| CARB Approved | Yes1 |
Sources: 1AmericanMuscle
Price Comparison
Compare prices across 1 retailer — every link opens the real product page
Best price
$697.00
at AmericanMuscle
Frequently Asked Questions
Will the Magnum Force Stage-2 Intake (6.4 L) fit my car?
Verified fitment includes 2022 Dodge Challenger. The full compatibility list is shown in the Compatible Vehicles section above; if your specific year/trim is not listed, double-check with the retailer before purchase.
Based on product data
How hard is it to install the Magnum Force Stage-2 Intake (6.4 L)?
This is rated as an easy bolt-on install (30-45 minutes). Most owners complete it in a driveway with hand tools.
Based on product data
Does the Magnum Force Stage-2 Intake (6.4 L) come with a warranty?
Yes — a 2-year limited warranty per the listing on americanmuscle. Refer to the retailer or manufacturer for the full terms before installation.
Based on product data
How much horsepower does the Magnum Force Stage-2 Intake (6.4 L) add?
On a stock vehicle this typically adds about 15 HP and 14 lb-ft of torque at the crank, measured against a baseline pull. Real-world numbers vary by altitude, fuel quality, and supporting mods.
Based on product data
Do I need anything else to install the Magnum Force Stage-2 Intake (6.4 L)?
Plan on having or sourcing: Basic hand tools. No other mods required.. The build planner on this site flags missing supporting parts when you add this kit to a build.
Based on product data
Cold Air Intakes buyer's guide
How to pick cold air intakes for your Challenger — what matters, what doesn't, and what to avoid.
Install instructions, videos, sound clips, and reference docs collected from the manufacturer and retailers.
- Reference — CLICK HEREOpens Images
Other cold air intakes for your Challenger
Compare Side-by-SideK&N
Typhoon Cold Air Intake System
$422.99
+14
$274 cheaper
Airaid
MXP Series Cold Air Intake
$422.99
+15+17
Same HP gain · $274 cheaper
Mopar
Performance Cold Air Intake
$595.68
+8+10
7 HP less · $101 cheaper
Comp Cams
Stage 1 Performance Camshaft
$1,236.95
+35+25
+20 HP more · $540 more
Holley
Long Runner Intake Manifold
$598.95
+18+22
+3 HP more · $98 cheaper
Mishimoto
Catch Can Kit
$160.95
$536 cheaper